Glass Fixer Windshield Repair Kit

Repair your cracked windshield in just a few minutes with our Glass Fixer. The DIY windshield repair kit comes with everything you need to fill and repair small cracks or chips in your car’s windshield. It’s quick, easy, and reliable. Your car will look good as new in no time!

FEATURES:

• DIY windshield repair kit
• The set includes: resin, a repair device, curing strips, a razor blade, and instructions
• Minimizes appearance of cracks and/or chips
• Prevents damage from running and spreading
• Easy to use
• Takes only about 20 minutes to fix

INSTRUCTIONS (for cracks):

1. Slowly dispense resin into the crack, moving from one end to the other at about 3 seconds per centimeter
2. Wait about 5-10 minutes and check to see if the air is trapped in the crack
3. If air is trapped, very gently apply a small amount of pressure to both sides and center of the crack from inside the windshield to force air out
4. Dispense more resin into the crack to fill emptied air pockets if necessary
5. Cover crack with curing strips
6. Make sure the windshield is in direct sunlight and allow to cure for 5-10 minutes
7. Once cured, remove curing strips and scrape off the excess resin with a razor blade

INSTRUCTIONS (for chips, bullseyes, and starburst damage):

1. Scrape off loose glass fragments with a razor blade
2. Affix applicator base to windshield around the crack with suction cups making sure the ring is centered above the break
3. Screw the resin chamber into the center ring flattening the rubber mouth to windshield gently and completely
4. Squeeze 3-6 drops of the resin (depending on the extent of damage) into the resin chamber
5. Screw the pressure driver clockwise into the resin chamber and drive resin into the break
6. Wait about 4-6 minutes for repair resin to absorb into the break (if the resin has not reached all areas of the break, apply heat with a hot air gun to the inside of the windshield to help spread the resin)
7. Unscrew and remove the pressure driver to release any trapped air
8. Reapply pressure driver and repeat step 4-6 to fill air holes
9. Remove the applicator and add a drop of resin onto areas where damage is still visible
10. Cover area with curing strip (no pressure necessary)
11. Make sure the windshield is in direct sunlight and allow to cure for 5-10 minutes
12. Remove curing strip and scrape off any excess resin

• Quality Assurance: Over 8000+ Happy Customers
• Free Premium Shipping: Fast & Reliable with Track and Trace
• Easy 30 Days Return: We'll Make Things Right or You'll get Refund
• Everything Encrypted: Safe Payments via Credit/Debit Card or PayPal®
• Customer Satisfaction: Happy to assist within 24 hours